CWT5002-2 MODBUS GPRS RTU GSM alarm and controller 32 registers, 8DI, 8DO, 4AI, GPRS, SMS control

SKU
CWT5002-2
In stock
US$404.04 US$336.70
-
+
Overview
CWT5002-2 MODBUS GPRS RTU GSM alarm and controller 32 registers, 8DI, 8DO, 4AI, GPRS, SMS control from 3G Mobile CCTV

CWT5002-2 MODBUS GPRS RTU GSM alarm and controller 32 registers, 8DI, 8DO, 4AI, GPRS, SMS control

enables various kinds of devices with I/O and AD and Standard MODBUS protocols to communicate over GSM/GPRS network and the Internet easily and freely.

With 8 Digital Inputs, 8 drivable Outputs, 4 analog inputs and 1 selectable RS-232/485 serial port connect slave to read and writer 32 registers, CWT5002-2 is an ideal solution for factory automation, environmental monitoring and remote device management for M2M industry.

 

Feature

Advance features

·Adopted highly integrated industrial CPU

·Easy used GUI configure software

·Reliable performance with built-in double watchdog

·Low maintenance, 24×7 operation

·Support ring call when alarm

·Temperature sensor (optional)

·Internal battery and providing power cut off alarm

 

 

8 digital inputs feature

·Upload data when inputs are triggered

·Upload input status on schedule

·Can be reuse as pulse counter input

·SMS alarm when inputs are triggered

·NO or NC type can be preset

·Configurable for alarm and recover sms

·Remote query inputs status

 

 

8 relay drivable outputs feature

·Multiple output type can be preset

·Remote On/Off/Pulse outputs via GPRS or sms

·Configurable for pulse time

·Remote query outputs status via GPRS or sms

·Outputs can be activated by alarm or call

·Outputs can be activated on schedule

 

4 analog inputs feature

·Can preset normal range for AD input, upload data to server when above the normal range.

·Current values can be query by server or sms

·Configurable for alarm and recover SMS

·Configurable for alarm ensure time

·Configurable for alarm delay time

·Support offset and gain

 

Modbus feature

·Modbus RTU protocol on RS232 or RS485, monitor modbus slave

·Read or write 32 registers (coil or input registers) on Modbus via GPRS or SMS

·Upload data to server when coils are triggered

·Can preset normal range for input registers; upload data to server when above the normal range

·Support SMS operation (read or write registers)

 

 

GPRS feature

·Support connects 4 servers, the servers must connect internet and have static public IP address or Dynamic Domain name

·GPRS Transmission base on TCP/IP

·Support modbus TCP protocol

 

Specifications

 

Parameter item

Reference scope

DC Power supply

9-28V DC (Standard adapter: DC 12V/1.5A)

Power consumption

12V input  Max. 150mA/Average 50mA

Frequency range

Dual-frequency 900/1800 or 900/1800/850/1900

SIM Card

Supporting 3V SIM Card

Antenna

50 Ω SMA Antenna interface

Serial

Selectable RS-232/485

Temperature range

-30°C ~ +70 °C

Humidity range

Relative humidity 95%

Digital Input

8 digital inputs(Dry contact)

output

8 drivable relay outputs(open-collector outputs)

Output drive voltage

Equal to input DC voltage

Output drive power

Drive voltage ≤35V, drive current ≤500mA

Analog Input

4 analog inputs(4~20mA or 0~5V)

Audio interface

3.5mm audio in and audio out

Exterior dimension

130×80×25mm

Weight

370 g


More Information
Lens Normal lens
Manufacturer 3G Mobile
Write Your Own Review
You're reviewing:CWT5002-2 MODBUS GPRS RTU GSM alarm and controller 32 registers, 8DI, 8DO, 4AI, GPRS, SMS control